Plasmadize, General Magnaplate

US & Canada
1-800-441-6173
Worldwide
1-908-862-6200

For Superior Restoration of Worn Surfaces

Features unsurpassed resistance to corrosion and wear
Enhanced thermal spraying technique produces a coating more ductile than chromeplate
Can be applied in thick or thin layers
Available with a release (non-stick) or gripping surface
Ideal for protecting or restoring all types of parts
Some coatings perform at temperatures as high as 1,300°F
Can be applied on-site
Many coatings are USDA/FDA-compliant

PLASMADIZE 3129-53	Extremely wear resistant and excellent release, this coating is used in applications that extreme and allow open tolerances. USDA/FDA/AgriCanada compliant.
PLASMADIZE 1410-04	Ability to release adhesive tapes and hot melt glue.
PLASMADIZE 3121-04	Ability to release adhesives tapes and hot melt glue similar to 1410-04 but smoother profiles allows use where films or package surfaces are subject to marring.
PLASMADIZE 1401-10	Excellent release and durability with a textured surface that minimizes point contact in applications where film release is required. Outstanding thermal conductivity and corrosion resistance. USDA/FDA/AgriCanada Compliant.
PLASMADIZE 3129-10	Good all purpose coating with abrasion resistance, wear resistance and corrosion resistance. Excellent for lowering friction of sliding objects. USDA/FDA/AgriCanada Compliant.
PLASMADIZE EXC	Ultimate in wear resistance and low coefficient of friction. Used in the most severe applications USDA/FDA/AgriCanada- compliant.

Plasmadize 3129-53
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					YES

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

Plasmadize 1410-04
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					NO

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

Plasmadize 3121-04
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					NO

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

Plasmadize 1401-10
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					YES

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

Plasmadize 3129-10
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					YES

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

Plasmadize EXC
Wear	Corrosion	Lubricity	Anti-Stick	Temperature	FDA/USDA
					YES

Ratings are meant for reference only. For specific application recommendations contact the General Magnaplate technical staff.

1.5

2.5

3.5

4.5

Revolutionary, enhanced thermal spray composite coatings feature high levels of wear and corrosion resistance dry-lubricity and mold release not possible with conventional spray methods. Infused matrix of metals, ceramics, polymers and/or dry lubricants creates structural integrity and a non-porous, moisture-proof surface.

Provides unsurpassed abrasion resistance for diffuse loads. Can be applied in substantial thicknesses, extending wear life. Exact hardness measurements not available due to composite nature. Hardness of matrix materials used surpasses Rc scale. EWR as low as 0.1 mg per 1,000 cycles.

Appropriate selection of the infused polymer or the application of another surface polymer provides a highly lubricious non-stick surface, with a COF as low as 0.13 on an 8 RMS surface.

Normal temperature range: -200° to +500° F. PLASMADIZE EXC features a top range of +1,000° F, except when applied to aluminum. PLASMADIZE NWG exhibits excellent wear resistance up to +1,300° F. Room temperature wear resistance of NWG is unaffected by excursions to +1,300° F.

Corrosion resistance Exceeds 300 to 1,000 hours salt spray as per ASTM B-117, depending on the polymer and substrate used. Resists acids, alkalis, most organic solvents, chlorides, sulfites and thiosulfates, as well as pulp bleaching chemicals.

Thickness range from .001" to .010". An effective thickness of .008" may be achieved by depositing an initial layer of thermally-sprayed metal.

Typical Applications:
PLASMADIZE is ideal for protecting or restoring all types of metal parts. Available as a release (non-stick) or gripping surface, depending on application. Can be applied at a Magnaplate Technology Center or on-site at your facility.